Table of Contents
Advertisement
5.6 Warning indicators
C
Warning indicators may vary
depending on the model of your
drying machine.
Filter cleaning
When the program is completed, the warning
indicator for filter cleaning turns on.
Cleaning of filter drawer/heat
exchanger
Warning symbol flashes periodically to remind
that filter drawer must be cleaned.
5.7 Starting the program
Press the Start/Stand-by button to start the
program.
Start/Stand-by and Drying indicators turn on
to show that program started.
5.8 Child Lock
The drying machine has a child lock which
prevents the program flow from being
interrupted when the buttons are pressed
during a program. When the Child Lock is
activated, all buttons on the panel except the
On/Off/Program Selection
deactivated.
Press the Audible Warning button for 3
seconds in order to activate the child lock.
The child lock has to be deactivated to be
able to start a new program after the current
program is finished or to be able to interfere
with the program. To deactivate the child
lock, keep the same buttons pressed for 3
seconds.
C
When the child lock is activated, the
child lock warning indicator on the
screen turns on.
When the child lock is active:
The drying machine runs, or in stand-by state
the indicator symbols will not change upon
changing the position of the program selection
button.
Dryer / User Manual
C
5.9 Changing the program
after it is started
You can change the program you selected to
dry your laundry with a different program after
the drying machine starts running.
•
•
Adding and removing clothes during stand-by
If you want to add or remove clothes to/from
the drying machine after the drying program
button are
starts:
•
•
•
When the drying machine is
operating and the child lock is
activated, double beep sound is
heard when the program selector
switch is turned. If the child lock
is cancelled without turning the
program selector button back to
its original position, the program
is terminated since the program
selector button is turned.
For example, Pause the program and turn
the On/Off/Program Selection button to
select the Extra Dry program in order to
select the Extra Dry program instead of
Ironing Dryness.
Press the Start/Stand-by button to start
the program.
Press the Start/Stand-by button to put
the drying machine in Stand-by state. The
drying operation stops.
Open the loading door while in Stand-
by state, and close the door after you
remove or add laundry.
Press the Start/Stand-by button to start
the program.
23 / EN
Advertisement
Table of Contents
