BREDABEDS URBAN MURPHY Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. BREDABEDS Manuals
  4. Indoor Furnishing
  5. URBAN MURPHY
  6. Assembly instructions manual

BREDABEDS URBAN MURPHY Assembly Instructions Manual

Bed w/ right hutch
Hide thumbs
Table of Contents

Advertisement

Quick Links

BREDABEDS
MURPHY BED
W/ RIGHT HUTCH
INCLUDING URBAN AND METROPOLITAN COLLECTION MURPHY BEDS
Assembly Instructions
3318 West Nelis Drive
Meridian, ID 83646
/
Parts List
/
Troubleshooting
https://bredabeds.com
Web:
Email:
service@bredabeds.com
1-855-466-4781
Telephone:
/
FAQ
/
Tips
/
Warranty
REVISION: H|3.9
OCTOBER 2022
MB1-HR

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the URBAN MURPHY and is the answer not in the manual?

Questions and answers

Related Manuals for BREDABEDS URBAN MURPHY

Summary of Contents for BREDABEDS URBAN MURPHY

  • Page 1 BREDABEDS MURPHY BED W/ RIGHT HUTCH INCLUDING URBAN AND METROPOLITAN COLLECTION MURPHY BEDS Assembly Instructions Parts List Troubleshooting Tips Warranty REVISION: H|3.9 https://bredabeds.com Web: MB1-HR 3318 West Nelis Drive Email: service@bredabeds.com OCTOBER 2022 1-855-466-4781 Meridian, ID 83646 Telephone:...
  • Page 2 Thank you for purchasing a BredaBed! THANK YOU! Thank you for your Murphy Bed purchase by BredaBeds! When you’re ready to begin assembly, follow these instructions carefully and be sure not to skip any steps. If you have any trouble during the assembly process, feel free to contact us and one of our specialists will be happy to help guide you through the process.

  • Page 3: Table Of Contents

    WARRANTY POLICY BredaBeds warranties all mechanical hardware for a period of ten (10) years, all wood parts on our products for a period of one (1) year to be free of material or workmanship defects and electronics (such as lights) for a period of ninety (90) days. Warranty periods begin from date of purchase.

  • Page 4: Important Safety Information - Read This First

    Never bypass safety checklists shown in this format without verifying each item in the checklist. If you have any questions, contact us (phone: 1-855-466-4781, email: service@bredabeds.com or live chat: https://bredabeds.com) before proceeding. Additionally - Keep children and pets away from work area during assembly for their safety.

  • Page 5: Assembly Tips

    Assembly Tips ASSEMBLY TIPS TWO PEOPLE ALLOW YOURSELF VIDEO RECOMMENDED SUFFICIENT TIME INSTRUCTIONS We recommend that When you’re ready Scan the QR Code above to view our two people assemble to begin assembly, Murphy Bed assembly our products. always give yourself video or visit: Throughout these suffi cient time so that...

  • Page 6: Unpacking Your Bredabed & Frequently Asked Questions

    I have damaged parts on my bed, what do I do? Do not begin assembly! As soon as you fi nd damage, send us an email at service@bredabeds.com with pictures of the damaged areas, part name(s) (found on the part label), provide your order number and any other additional information.

  • Page 7: Troubleshooting

    • The top and bottom screws are used to adjust the door higher or lower. Metropolitan Beds: The screws are poking through the thin areas on the doors. Metropolitan beds have a recessed area on the doors. This area is marked as a screw-free zone in Chapter 4. Contact BredaBeds to discuss replacement options.

  • Page 8: Parts List: Panels, Hardware Packages & Before You Begin

    Parts List: Panels PARTS LIST: PANELS Bed Cabinet Panel List Door(s)* Hutch Top Shelf Right Hutch, Left Side Hutch Bottom Shelf Right Hutch Right Side Hutch Mid Shelf Bed Cabinet Left side Hutch Adjustable Shelf (Qty 3) Bed Cabinet Top Hutch Toe Kick Bed Cabinet Top Nailer &...
  • Page 9 Parts List: Panels The following parts will depend on your specific hutch configuration. Hutch Top Door Hutch Bottom Door Hutch Top Door Hutch Bottom Door 3 Drawers And Pull-Out Night Shelf Drawer Front 1 (Qty 1) Drawer Back 1 (Qty 1) Drawer Side 1 (Qty 2) Drawer Front 2 (Qty 2) Drawer Back 2 (Qty 2)
  • Page 10 Hardware Packages HARDWARE PACKAGES You will have 3 boxes of hardware, the following images are color-coded for each box: • Orange outline: Hardware can be found inside the small white or brown box. • Grey outline: Hardware can be found inside the long box “Murphy Bed Frame”. •...
  • Page 11 Before You Begin Installation tools that are required Cordless Drill or Impact Driver #2 Phillips Screwdriver #2 and #3 Phillips bit Stud Finder Drill Bit Set Socket Set Level 1/2” Wrench or Adjustable wrench Tape Measure Ladder or Step Stool Rubber Mallet Gloves (Optional) UNDERSTANDING CAM FITTINGS...

  • Page 12: Chapter 1: Hardware Insertion

    Chapter 1: Hardware insertion. Chapter 1: Hardware insertion. REQUIRED TOOLS REQUIRED HARDWARE • Rubber Mallet • Hardware Package #1 (white box) • Cordless Drill with #2 Phillips • Hardware Card #2 (mech. box) (white box) • 1/2” Socket • Hardware Package #6 (white box) •...
  • Page 13 Chapter 1: Hardware insertion. Referring to Fig 1B, lay panels on floor and insert cam screws from STEP 2 hardware package #1 in holes marked with a circle using a cordless drill. FIG. 1B Right Hutch Right Hutch Left Side Right Side 27”...
  • Page 14 Left Side”, insert cam screws from hardware package #1 in holes marked with a circle using a cordless drill. Green Boxed Areas: BredaBeds Murphy FIG. 1C Beds are designed for a mattress thickness of 11” or under, however Right Hutch...
  • Page 15 Chapter 1: Hardware insertion. FIG. 1D Bed Left Side Bed Right Side STEP 4 Attach each mechanism to the face of the side panels as shown in Fig. 1D using qty 5 bolts and qty 4 nylock nuts found in Hardware Card #2.
  • Page 16 Chapter 1: Hardware insertion. Referring to Fig. 1E, lay parts on floor and insert cam screws from hardware package #1 in holes marked with a circle STEP 5 using a cordless drill (see note at the bottom of this page). Insert cam fittings from hardware package #6 in holes marked with a green...

  • Page 17: Chapter 2: Bed Cabinet Assembly

    Chapter 2: Bed Cabinet assembly. Chapter 2: Bed Cabinet assembly. REQUIRED TOOLS: #2 Phillips Screwdriver You’ll now assemble the Bed Cabinet on the floor directly in front of the wall where the OVERVIEW: bed will attach, then tilt the unit up. To do this, you’ll need at least 3 extra inches of height clearance.
  • Page 18 Chapter 2: Bed Cabinet assembly. Lower “Bed Cabinet Top Nailer” onto “Bed Cabinet Top” as shown in Fig. 2C and tighten cam fitting using a #2 Phillips STEP 3 screwdriver. Note: Make sure cam fittings are facing toward and aligned to this back edge of the “Bed Cabinet Top” as illustrated below.
  • Page 19 Chapter 2: Bed Cabinet assembly. FIG. 2E STEP 5 Slide hutch in direction of arrow and tighten all cam fittings. FIG. 2F STEP 6 Attach “Headboard” and “Bed Cabinet Bottom Nailer” as shown and tighten cam fittings. The Headboard will normally sit at a slight angle.
  • Page 20 Cam fittings on the Bed Cabinet Top should face down and WILL be • visible from below. If any of these parts are backwards, they must be flipped around. If you have any questions, contact us (phone: 1-855-466-4781, email: service@bredabeds.com or live chat: https://bredabeds.com) before proceeding.

  • Page 21: Chapter 3: Attaching The Bed Cabinet To The Wall

    Chapter 3: Attaching the Bed Cabinet to the wall. Chapter 3: Attaching the Bed Cabinet to the wall. REQUIRED TOOLS REQUIRED HARDWARE • Cordless Drill and/or Impact Driver • Hardware Package #10 (white box) • #2 & #3 Phillips Bit •...
  • Page 22 Chapter 3: Attaching the Bed Cabinet to the wall. FIG. 3A - DRYWALL CUTAWAY SHOWING WALL STUDS STEP 2 Using a stud finder, locate and mark the exact center of each stud (see page 7 if you have 3 or less stud locations) along the “Bed Cabinet Top...
  • Page 23 ***IN SERIOUS INJURY OR DEATH!*** DO NOT attempt to proceed if the Bed Cabinet Top Nailer is damaged or cracked. Contact BredaBeds for a replacement. DO NOT remove the warning tape on the Top Nailer. If the warning is missing or damaged, contact BredaBeds to receive replacement tape.
  • Page 24 If your wall backing varies from this, visit: https://breda.us/walls Contact BredaBeds to discuss if you have any questions or concerns. Have you used the screws provided? Do not deviate from using the screws provided without written authorization.

  • Page 25: Chapter 4: Assembling The Bed Face Panel Unit

    Chapter 4: Assembling the Bed Face Panel unit. Chapter 4: Assembling the Bed Face Panel unit. REQUIRED TOOLS REQUIRED HARDWARE • Cordless Drill and/or Impact Driver • Hardware Card #3 (frame box) • 5/16” Socket • Hardware Card #7 (frame box) •...
  • Page 26 Chapter 4: Assembling the Bed Face Panel unit. For video instructions of this chapter, visit: https://breda.us/frame Lay the metal frame pieces on top of the bed doors with the wider ledge and holes facing down towards the bed doors. Use STEP 2 the hardware from Hardware Card #3 for the following: LEG END CORNERS: Referring to Fig.
  • Page 27 Chapter 4: Assembling the Bed Face Panel unit. For video instructions of this chapter, visit: https://breda.us/frame Position the frame 1/2” from FIG. 4G - OVERHEAD VIEW “Mechanism End” and centered STEP 3 along the left and right sides. Attach frame to doors using Critical Step screws from hardware card #7.
  • Page 28 Review Chapter 4, Step 2, Fig 4C and Fig 4D Is the work area clear of children & pets? If you have any questions, contact us (phone: 1-855-466-4781, email: service@bredabeds.com or live chat: https://bredabeds.com) before proceeding.

  • Page 29: Chapter 5: Attaching The Bed Face Panel To The Bed Cabinet

    Chapter 5: Attaching the Bed Face Panel to the Bed Cabinet. Chapter 5: Attaching the Bed Face Panel to the Bed Cabinet. REQUIRED TOOLS REQUIRED HARDWARE • 1/2” Socket • Hardware Card #2 (mech. box) • 1/2” Wrench • Springs (mech.
  • Page 30 Chapter 5: Attaching the Bed Face Panel to the Bed Cabinet. For video instructions of this chapter, visit: https://breda.us/face FIG. 5E - LEFT SIDE SHOWN STEP 2 Slide the steel tube over the mechanism arm and pull outward to engage the arm lock on the T-Nut as shown in Fig.
  • Page 31 Chapter 5: Attaching the Bed Face Panel to the Bed Cabinet. For video instructions of this chapter, visit: https://breda.us/face The bolts for Holes #1, #2 and #3 will all attach from the outside of the frame. In other words, the bolt heads will be on the outside of the frame and the nuts will go on the inside of the frame for all three of the holes.
  • Page 32 Chapter 5: Attaching the Bed Face Panel to the Bed Cabinet. For video instructions of this chapter, visit: https://breda.us/face FIG. 5G - LOOKING THROUGH LEFT SIDE FIG. 5H - LOOKING THROUGH LEFT SIDE 1. Referring to Fig. 5G, stand the Bed Face Panel in vertical STEP 5 position between the mechanism arms, lifting until the bolt in Hole #3 drops in the slotted portion of each mechanism arm.

  • Page 33: Chapter 6: Installing The Handles, Leg Support And Mattress

    DO NOT PROCEED PAST THIS POINT WITHOUT FIRST VERIFYING THE FOLLOWING: Have the bolts in Hole #2 been inserted? If you have any questions, contact us (phone: 1-855-466-4781, email: service@bredabeds.com or live chat: https://bredabeds.com) before proceeding. Chapter 6: Installing the handles, leg support and mattress.
  • Page 34 Chapter 6: Installing the handles, leg support and mattress. • Install the leg connector rod between the legs and secure with Hex head bolts and star washers from Hardware Card #4 and STEP 4 securely tighten Hex bolt with a 7/16” socket. •...

  • Page 35: Chapter 7: Final Adjustment For The Bed Cabinet And Springs

    Bed Cabinet Top Nailer from the wall. Prior to doing this, measure how far and in what direction the bed cabinet needs to shift in order to achieve alignment. If you have any questions, contact us (phone: 1-855-466-4781, email: service@bredabeds. com or live chat: https://bredabeds.com) before doing anything.
  • Page 36 Chapter 7: Final adjustment for the Bed Cabinet and springs. To determine the proper tension, the mattress needs to be in place. When open, the bed legs should rest on the STEP 2 fl oor without lifting. When closed, the bed should stay closed without falling back open.

  • Page 37: Chapter 8: Installing Hutch Options

    Chapter 8: Installing hutch options. Chapter 8: Installing hutch options. REQUIRED TOOLS Follow the steps in this • Rubber Mallet chapter depending on how the • Cordless Drill with #2 Phillips side hutch was configured. • #2 Phillips Screwdriver For video instructions of this chapter, visit: https://breda.us/hutch-ops Follow steps 1-5 if your side hutch was configured with drawers.
  • Page 38 Chapter 8: Installing hutch options. For video instructions of this chapter, visit: https://breda.us/hutch-ops Referring to Fig. 8C, insert cam screws from hardware package 3 Drawers And #1 in holes marked with a circle using a cordless drill. Night Shelf STEP 3 Insert white cam fittings from hardware package #19 in holes green marked with a...
  • Page 39 Chapter 8: Installing hutch options. For video instructions of this chapter, visit: https://breda.us/hutch-ops Follow steps 6 and 7 if your side hutch was configured with doors. Attach hinge plates from hardware package #16 as shown in Hutch Top Or Fig. 8F using the screws on hinge plate. The front of the hinge Bottom Door plates attach exactly 3/4”...
  • Page 40 Chapter 8: Installing hutch options. For the Hutch Top Door or Hutch Bottom Door, assembly is Hutch Top Or identical. Attach door hinge (2 hinges per door) by aligning the Bottom Door hinge to the bored holes and push down. Tighten the top and STEP 7 bottom screws on the hinge by hand with a screwdriver until snug.

  • Page 41: Chapter 9: How To Disassemble The Bed For Moving

    Chapter 9: How to disassemble the bed for moving. Chapter 9: How to disassemble the bed for moving. REQUIRED TOOLS ESTIMATED TIME • Cordless Drill with #2 Phillips 30 Minutes • 1/2 Wrench or Adjustable Pliers Note: This is an average time only, yours may vary.

This manual is also suitable for:

Metropolitan murphy

Table of Contents