1. Manuals
  2. Brands
  3. BREDABEDS Manuals
  4. Indoor Furnishing
  5. HORIZONTAL MURPHY BED WITH TOP HUTCH
  6. Assembly instructions manual

BREDABEDS HORIZONTAL MURPHY BED WITH TOP HUTCH Assembly Instructions Manual

Hide thumbs Also See for HORIZONTAL MURPHY BED WITH TOP HUTCH:
Table of Contents

Advertisement

Quick Links

Download this manual
HORIZONTAL
MURPHY BED
WITH TOP HUTCH
INCLUDING URBAN AND METROPOLITAN COLLECTION MURPHY BEDS
Assembly Instructions
3318 West Nelis Drive
Meridian, ID 83646
/
Parts List
/
Troubleshooting
https://bredabeds.com
Web:
Email:
service@bredabeds.com
1-855-466-4781
Telephone:
/
FAQ
/
Tips
/
Warranty
REVISION: E|4.0
DECEMBER 2022
HZ-MBT

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HORIZONTAL MURPHY BED WITH TOP HUTCH and is the answer not in the manual?

Questions and answers

Related Manuals for BREDABEDS HORIZONTAL MURPHY BED WITH TOP HUTCH

Summary of Contents for BREDABEDS HORIZONTAL MURPHY BED WITH TOP HUTCH

  • Page 1 HORIZONTAL MURPHY BED WITH TOP HUTCH INCLUDING URBAN AND METROPOLITAN COLLECTION MURPHY BEDS Assembly Instructions Parts List Troubleshooting Tips Warranty REVISION: E|4.0 https://bredabeds.com Web: HZ-MBT 3318 West Nelis Drive Email: service@bredabeds.com DECEMBER 2022 1-855-466-4781 Meridian, ID 83646 Telephone:...
  • Page 2 Thank you for purchasing a BredaBed! THANK YOU! Thank you for your Murphy Bed purchase by BredaBeds! When you’re ready to begin assembly, follow these instructions carefully and be sure not to skip any steps. If you have any trouble during the assembly process, feel free to contact us and one of our specialists will be happy to help guide you through the process.

  • Page 3: Table Of Contents

    WARRANTY POLICY BredaBeds warranties all mechanical hardware for a period of ten (10) years, all wood parts on our products for a period of one (1) year to be free of material or workmanship defects and electronics (such as lights) for a period of ninety (90) days. Warranty periods begin from date of purchase.

  • Page 4: Important Safety Information - Read This First

    Never bypass safety checklists shown in this format without verifying each item in the checklist. If you have any questions, contact us (phone: 1-855-466-4781, email: service@bredabeds.com or live chat: https://bredabeds.com) before proceeding. Additionally - Keep children and pets away from work area during assembly for their safety.

  • Page 5: Assembly Tips

    Assembly Tips ASSEMBLY TIPS TWO PEOPLE ALLOW YOURSELF VIDEO RECOMMENDED SUFFICIENT TIME INSTRUCTIONS We recommend that When you’re ready Scan the QR Code above to view our two people assemble to begin assembly, Murphy Bed assembly our products. always give yourself video or visit: Throughout these suffi cient time so that...

  • Page 6: Unpacking Your Bredabed & Frequently Asked Questions

    I have damaged parts on my bed, what do I do? Do not begin assembly! As soon as you fi nd damage, send us an email at service@bredabeds.com with pictures of the damaged areas, part name(s) (found on the part label), provide your order number and any other additional information.

  • Page 7: Troubleshooting

    Alternatively, you can remove or notch the baseboard. I have 3 or less stud locations to attach the Bed Cabinet to. Contact us to discuss attachment. Email us at service@bredabeds.com showing a photo of your Bed Cabinet with tape marking where your studs are located.

  • Page 8: Parts List: Panels, Hardware Packages & Before You Begin

    Parts List: Panels PARTS LIST: PANELS Bed Cabinet Panel List  Bed Cabinet Left Side  Bed Cabinet Mid Shelf  Bed Cabinet Right Side  Headboard  Top Nailer Cover  Bed Cabinet Toe Kick  Bed Cabinet Top Nailer ...
  • Page 9 Hardware Packages HARDWARE PACKAGES You will have 3 boxes of hardware, the following images are color-coded for each box: • Orange outline: Hardware can be found inside the small white or brown box. • Grey outline: Hardware can be found inside the long box “Steel Bed Frame”. •...
  • Page 10 Before You Begin Installation tools that are required  Cordless Drill or Impact Driver  #1 & #2 Phillips Screwdriver  #2 and #3 Phillips bit  Stud Finder  Drill Bit Set  Socket Set  Level  1/2” Wrench or Adjustable Wrench ...

  • Page 11: Chapter 1: Hardware Insertion

    Left Side Right Side Hardware Package #1 in holes marked with a circle using a cordless drill. BredaBeds Murphy Beds are designed for a mattress thickness of 11” or under, however Headboard area AB/BA is adjustable for mattress thicknesses greater than 11” if needed. In this area, use only 1 cam screw per side: •...
  • Page 12 Chapter 1: Hardware insertion. FIG. 1C Bed Cabinet Top Nailer STEP 2 Vertical Divider Bed Cabinet Top Referring to Fig. 1C, lay parts on floor Bed Cabinet Mid Nailer and insert cam fittings from Hardware Package #6 in holes marked with a green circle using a rubber mallet (see Bed Cabinet Mid Shelf...

  • Page 13: Chapter 2: Bed Cabinet Assembly

    Chapter 2: Bed Cabinet assembly. Chapter 2: Bed Cabinet assembly. REQUIRED TOOLS: #1 Phillips Screwdriver You’ll now assemble the Bed Cabinet on the floor directly in front of the wall where the OVERVIEW: bed will attach, then tilt the unit up. To do this, you’ll need at least 3 extra inches of height clearance.
  • Page 14 Chapter 2: Bed Cabinet assembly. From the perspective shown, cam fittings on the Toe Kick and Headboard should be facing up, and tighten from the top side. If assembling vertically, these cam fittings should face the wall the Bed Cabinet will attach to. Once assembled, cam fittings on these parts should not be visible.
  • Page 15 Chapter 2: Bed Cabinet assembly. Referring to the illustrations FIG. 2F on this page, attach each STEP 5 mechanism foot from Hardware Card #2, to the mechanisms. They will attach toward the bottom at the piece of steel bent at 90°. At this time, keep each foot loose and make sure the bottom of the feet do not stick past the bottom of the panel.
  • Page 16 Cam fittings on the Bed Cabinet Top and Mid Shelf should face down • and WILL be visible from below. If any of these parts are backwards, they must be flipped around. If you have any questions, contact us (phone: 1-855-466-4781, email: service@bredabeds.com or live chat: https://bredabeds.com) before proceeding.

  • Page 17: Chapter 3: Attaching The Bed Cabinet To The Wall

    Chapter 3: Attaching the Bed Cabinet to the wall. Chapter 3: Attaching the Bed Cabinet to the wall. REQUIRED TOOLS REQUIRED HARDWARE • Cordless Drill and/or Impact Driver • Hardware Card #2 (mech. box) • #2 & #3 Phillips Bit •...
  • Page 18 Chapter 3: Attaching the Bed Cabinet to the wall. FIG. 3A - DRYWALL CUTAWAY SHOWING WALL STUDS STEP 2 Using a stud finder, locate and mark the exact center of each stud (see page 7 if you have 3 or less stud locations) along the “Bed Cabinet Top Nailer”.
  • Page 19 INTO DRYWALL ONLY ARE NOT ADEQUATE. DO NOT attempt to proceed if the Bed Cabinet Top Nailer is damaged or cracked. Contact BredaBeds for a replacement. DO NOT remove the warning tape on the Top Nailer. If the warning is missing, damaged or removed, contact BredaBeds to receive replacement tape.
  • Page 20 Diff erent instructions must be followed for steel studs, concrete, brick, etc. Contact BredaBeds to discuss if you have any questions or concerns. Have you used the screws provided? Do not deviate from using the screws provided without written authorization.

  • Page 21: Chapter 4: Assembling The Bed Face Panel Unit

    Chapter 4: Assembling the Bed Face Panel unit. Chapter 4: Assembling the Bed Face Panel unit. REQUIRED TOOLS REQUIRED HARDWARE • Cordless Drill and/or Impact Driver • Hardware Card #3 (frame box) • Socket Set • Hardware Card #4 (frame box) •...
  • Page 22 Chapter 4: Assembling the Bed Face Panel unit. For video instructions of this chapter, visit: https://breda.us/frame Lay the metal frame pieces on top of the bed doors with the wider ledge and holes facing down towards the bed doors. Use STEP 2 the hardware from Hardware Card #3 for the following: LEG END CORNERS: Referring to Fig.
  • Page 23 Chapter 4: Assembling the Bed Face Panel unit. Position the FIG. 4G - OVERHEAD VIEW frame 1/2” from STEP 3 “Mechanism End” and centered Critical Step along the left and right sides. Attach frame to doors using #8 x 5/8” wood screws from hardware card #3.
  • Page 24 Review Chapter 4, Step 2, Fig 4C and Fig 4D Is the work area clear of children & pets? If you have any questions, contact us (phone: 1-855-466-4781, email: service@bredabeds.com or live chat: https://bredabeds.com) before proceeding.
  • Page 25 Chapter 4: Assembling the Bed Face Panel unit. Attach the mattress strap from Hardware Card #5 for securing the mattress. Measure approx. 18” from the Mechanism End STEP 6 and locate the nearest frame screw. Remove the frame screw, then attach the screw directly through the end of the nylon optional strap.

  • Page 26: Chapter 5: Attaching The Bed Face Panel To The Bed Cabinet

    Chapter 5: Attaching the Bed Face Panel to the Bed Cabinet. Chapter 5: Attaching the Bed Face Panel to the Bed Cabinet. REQUIRED TOOLS REQUIRED HARDWARE • 1/2” Socket • Hardware Card #2 (mech. box) • 1/2” Wrench • Springs (mech.
  • Page 27 Chapter 5: Attaching the Bed Face Panel to the Bed Cabinet. For video instructions of this chapter, visit: https://breda.us/face FIG. 5E - LEFT SIDE SHOWN STEP 2 Slide the steel tube over the mechanism arm and pull outward to engage the arm lock on the T-Nut as shown in Fig.
  • Page 28 Chapter 5: Attaching the Bed Face Panel to the Bed Cabinet. For video instructions of this chapter, visit: https://breda.us/face The bolts for Holes #1, #2 and #3 will all attach from the outside of the frame. In other words, the bolt heads will be on the outside of the frame and the nuts will go on the inside of the frame for all three of the holes.
  • Page 29 Chapter 5: Attaching the Bed Face Panel to the Bed Cabinet. For video instructions of this chapter, visit: https://breda.us/face FIG. 5G - LOOKING THROUGH LEFT SIDE FIG. 5H - LOOKING THROUGH LEFT SIDE 1. Stand the Bed Face Panel up vertically between the mechanism STEP 5 arms, rotate the legs into the open position, then lift and drop the bolts in Hole #3 into the slotted portion of each mechanism arm.

  • Page 30: Chapter 6: Final Adjustment For The Bed Cabinet And Springs

    Bed Cabinet Top Nailer from the wall. Prior to doing this, measure how far and in what direction the bed cabinet needs to shift in order to achieve alignment. If you have any questions, contact us (phone: 1-855-466-4781, email: service@bredabeds.com or live chat: https://bredabeds.com) before doing anything.
  • Page 31 Chapter 6: Final adjustment for the Bed Cabinet and springs. Close the bed and verify the FIG. 6A side reveals are even on STEP 3 both sides, top-to-bottom. You can now attach the “Baseboard Brackets” using two 3” long screws from Hardware Card #2 in each bracket.

  • Page 32: Chapter 7: Optional Top Hutch Doors

    Chapter 7: Optional top hutch doors. Affix the clear sleeve envelope under the mattress and store Finishing your instructions there for future use. The part labels can now be removed, but do not remove the warning tape. Any shims sticking out can be cut off, but do not pull them out. For tips on cleaning parts, visit: https://breda.us/cleaning Chapter 7: Optional top hutch doors...

  • Page 33: Chapter 8: How To Disassemble The Bed For Moving

    Chapter 8: How to disassemble the bed for moving. Chapter 8: How to disassemble the bed for moving. REQUIRED TOOLS ESTIMATED TIME • Cordless Drill with #2 Phillips 30 Minutes • 1/2 Wrench or Adjustable Pliers Note: This is an average time only, yours may vary.

Table of Contents