G-2426G-B unit data sheet
G-2426G-B interfaces and interface capacity
Figure 5-5 G-2426G-B indoor ONT with fiber optic connector
Table 5-6, "G-2426G-B indoor ONT physical connections" (p. 57)
connections for G-2426G-B indoor ONTs.
Table 5-6 G-2426G-B indoor ONT physical connections
1
Connection
Print Letters
POTS port
TEL1 and TEL2
Ethernet ports
LAN1 to LAN4
Power input
POWER
Reset button
RESET
WLAN button
WLAN
WPS button
WPS
On/Off button
ON/OFF
June 2021
Issue 1
Description
This connection is provided through an RJ-11 port. One POTS connection is supported.The
POTS port supports voice services.
This connection is provided through Ethernet RJ-45 connectors. Up to four 10/100/1000
Base-T Ethernet interfaces are supported.The Ethernet ports can support both data and
in-band video services on all four interfaces.
This connection is provided through the power connector. A power cable fitted with a barrel
connector is used to make the connection.
Pressing the Reset button for less than 10 seconds reboots the ONT; pressing the Reset
button for 10 seconds resets the ONT to the factory defaults, except for the LOID and SLID.
Wi-Fi service is compliant with IEEE 802.11 standards and is enabled and disabled using the
WLAN button.
The Wi-Fi Protected Setup (WPS) button enables and disables the WPS.
This button turns the ONT on or off.
3FE-49441-ABAA-TCZZA
Nokia ONT
36734
describes the physical
57