Configuring The Url Filter; Table 8-29 Ip Filter Parameters - Nokia ONT Product Manual

Configure a G-2426G-B indoor ONT
Security configuration

Configuring the URL filter

2
Configure the following parameters:

Table 8-29 IP Filter parameters

Field
Enable IP Filter
Mode
Internal Client
Local IP Address
Source Subnet Mask
Remote IP Address
Destination Subnet Mask
Protocol
3
Click Save.
Click Refresh to view the up-to-date information.
E
ND OF STEPS
8.35 Configuring the URL filter
1
Click Security→URL Filter from the left pane in the GPON Home Gateway page. The URL
Filter page displays.
June 2021
Issue 1
Description
Select this checkbox to enable an IP filter.
Select an IP filter mode from the list:
• Drop for upstream
• Drop for downstream
• Accept for upstream
• Accept for downstream
Select an internal client from the list:
• Custom settings: uses the IP address input below
• IP: uses the connecting devices' IP to the ONT
Enter the local IP address.
Enter the source subnet mask.
Enter the remote IP address.
Enter the destination subnet mask.
Select an application protocol or ALL from the list.
3FE-49441-ABAA-TCZZA
Nokia ONT
155