Configuring Wan Dhcp - Nokia ONT Product Manual

Configure a G-2426G-B indoor ONT
Network configuration

Configuring WAN DHCP

Table 8-14 WAN network parameters—Bridge Mode
Field
WAN Connection List
Connection mode
Enable/Disable
Service
Enable VLAN
VLAN Mode
LAN Port binding
SSID Port binding
3
Click Saveto save the configuration.
Click Delete to delete the configuration.
E
ND OF STEPS
8.20 Configuring WAN DHCP
1
Click Network→WAN DHCP from the left pane in the GPON Home Gateway page. The WAN
DHCP page displays.
June 2021
Issue 1
Description
Choose a WAN connection from the drop-down menu to set the connection parameters
This option is only available for the operator ID MSNA, and for some operator-specific operator IDs.
Choose a connection mode: Bridge Mode.
Select this checkbox to enable the WAN connection.
Select this checkbox only if this domain provides IPTV service.
Select this checkbox to add a VLAN tag. If this box is selected, you can add a VLAN number.
Select a VLAN mode from the drop-down menu.
Select a LAN port or ports that are associated with this bridge domain: LAN1, LAN2, LAN3, LAN4, or
LAN5.
These ports are bridged to the network over the same VLAN when it is added. Port-to-port
communication is permitted within the domain.
Select a SSID port or ports that are associated with this bridge domain: SSID1, SSID2, SSID3, SSID4,
SSID5, SSID6, SSID7, or SSID8.
These ports are bridged to the network over the same VLAN when it is added. Port-to-port
communication is permitted between devices associated with SSIDs or connected to LAN ports within
the domain.
3FE-49441-ABAA-TCZZA
Nokia ONT
125