Figure 7 Gateway 3 (G-240W-E) Physical Connections; Table 8 Gateway 3 (G-240W-E) Physical Connection - Nokia Gateway 3 Product Manual

Nokia WiFi Gateway 3 Product Guide
Issue: 01
Figure 7 Gateway 3 (G-240W-E) physical connections
POTS ports (2) RJ-11
Ethernet ports (4) RJ-45
Table 8 describes the physical connections for Gateway 3 (G-240W-E) devices.
Table 8 Gateway 3 (G-240W-E) physical connection
Connection
GPON LED
VOIP LED
On/Off button
WPS ON/Off button
USB 1 and USB 2
TEL1 and TEL2
LAN 1 to LAN 4
UPS
Reset button
Power input
3FE-47464-AAAA-TCZZA
GPON LED
GPON
On/off button
ON/OFF
USB ports (2)
USB 1
TEL 1
LAN 1
LAN 3
UPS connector
UPS
Description
This LED is used to show the start of the GPON uplink.
This LED is used to show the start of VOIP services.
This button powers the unit on or off.
This button is used to power the WiFi Protected Setup (WPS) of new WiFi devices
on or off.
This connection is provided through two USB 2.0 interfaces.
This connection is provided through two RJ-11 POTS ports.
This connection is provided through Ethernet RJ-45 connectors. Up to four
10/100/1000 Base-T Ethernet interfaces are supported. The Ethernet ports can
support both data and in-band video services on all four interfaces.
This connection is a reserved interface provided through a UPS cable.
Pressing the Reset button for less than 10 seconds reboots the device; pressing
the Reset button for 10 seconds resets the device to the factory defaults.
This connection is provided through the power connector. A power cable fitted with
a barrel connector is used to make the connection.
Gateway 3 (G-240W-E) unit data sheet
Reset
button
VOIP LED
RESET VOIP
Wi-Fi security button
WPS
USB 2
TEL 2
LAN 2
LAN 4
Power input
POWER
Bottom cover
28281
41