Table of Contents
Advertisement
To log in at the APEX1000 EM window:
1. Type a
<Username>
2. Type a
<Password>
the user root cannot be removed).
Note: For added security, the password will not echo on screen as asterisks (the
cursor will not appear to move), but the system will accept your (correctly typed)
password.
3. Type the
<APEX1000 IP address>
(The drop-down list contains the most recently accessed APEX1000s.)
4. Click OK.
The main APEX1000 EM window displays, showing the product's name, type, and
version:
Active Warnings
The Active Warnings feature allows the operator to take immediate action to correct the
fault or deactivate the alarm, as current conditions dictate:
•
If the APEX1000 does not have an active alarm at the time of login, only the EM
main window displays, as shown in the preceding graphic.
•
If there is an active warning (yellow), a major alarm (magenta), or a critical APEX1000
Unit Alarm (red), the Alarms window also displays when you first log in, as shown in
the example below:
Setup and Operation • Logging In
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
(root is the default).
(password is the default. This password can be changed, but
or select an APEX1000 from the drop-down list.
B
45
Advertisement
Table of Contents
