Parameter
Communication
Configuration
Redundant APEX IP Shows the IP address of the heartbeat interface in the redundancy pair.
•
Primary Failover
•
Secondary
Failover
•
Availability Fault
•
Link Fault
•
Configuration
Fault
For further Redundancy Alarm Status details, reference
Definitions.
Status • Reports
APEX1000 All-Purpose Edge QAM Software Version 2.4.x • Installation and Operation Manual
573408-001-a
Description
Values are:
•
Disconnected – No heartbeats have been received from secondary or
communication timed out
•
Connected – Heartbeat has been received and communication has not timed
out
The default is Disconnected.
Values are:
•
Unknown – State of secondary configuration is not applicable, or secondary
not connected
•
Synchronized – Secondary has same configuration as primary (except for
QAM outputs)
•
Out of Sync – Secondary configuration is not in sync with primary
The default is Unknown.
Redundancy Alarm Status
Shows the current alarm state of these redundancy functions. This section of
the window duplicates a portion of the
APEX Alarms
window.
Alarms Window Field
B
237