Connecting The Pc Or Printer - GE Moisture Image 1 Series Service Manual

Connecting the PC or
Printer
Installing Optional Features
You can connect a PC or printer using a serial cable with a 9-pin
female or 25-pin female connector. See Table 1-7 for the pin
connections for the cable connectors.
Table 1-7: RS232 Cable Pin Connections
Pin Assignments for External Device
DTE
DB25
Wire Pin #
Red Lead
(Transmit)
Green Lead
(Receive)
Black Lead
(Return)
The special GE Panametrics cable has a "MIS/MMS" label on one
end of the cable. Connect the "MIS/MMS" end of the cable to the 9-
pin connector on the rear of the electronics unit (see Figure 1-15).
Connect the other end of the cable to your output device and set up
the communications port as described in Setting Up the RS232
Communication Port in Chapter 3, Advanced Programming, of the
Programming Manual.
RS232 Communications
Figure 1-15: RS232 Communications Port
DTE DCE
DB9 DB25
Pin # Pin #
2 3
3 2
7 5
Port
June 2003
DCE
DB9
Pin #
3 2
2 3
7 5
1-19