Servicing The Spark Plug - Toro 22618 Operator's Manual

Figure 25
5. Slowly pour approximately 80% of the specified
oil into the filler tube and slowly add the
additional oil to bring it to the Full mark
26).
Figure 26

Servicing the Spark Plug

Spark Plug Specifications
Type: NGK BPR6ES or equivalent
Gap: 0.7 to 0.8 mm (0.028 to 0.031 inch)
Note:
Use a 21 mm (13/16 inch) spark-plug wrench
g206641
for removing and installing the spark plug.
Removing the Spark Plug
1. Park the machine on level ground, adjust the
jack stand to ensure that the machine is level,
and shut off the engine.
2. Locate and remove the spark plugs
g031623
(Figure
g206640
23
(Figure
Figure 27
27).
g019749
g027478