Table of Contents
Advertisement
Filling the Fuel Tank
Fuel Tank Capacity: 5.3 L (1.4 US gallons)
1.
Park the machine on level ground, adjust the
jack stand to ensure that the machine is level,
shut off the engine, and allow the engine to cool.
2.
Clean around the fuel cap and remove it
7).
1. Fuel cap
3.
Add fuel to the fuel tank until the level is at the
maximum fuel level
Important:
This space in the tank allows
fuel to expand. Do not fill the fuel tank
completely full.
Figure 7
(Figure
8).
(Figure
1. Maximum fuel level
g019799
4.
Install the fuel cap securely
5.
Wipe up any spilled fuel.
Preparing to Use the
Machine
1.
Park the machine on level ground and adjust the
jack stand to ensure that the machine is level.
2.
Disconnect the machine from the tow vehicle.
3.
Chock the front and back of the tires to prevent
the machine from moving.
4.
Ensure that all guards are in place and in good
condition.
5.
Ensure that the work area is free of wood and
debris.
6.
Perform all daily maintenance procedures
described in
10
Figure 8
(Figure
Maintenance (page
18).
g020679
7).
Advertisement
Table of Contents
