Canon varioPRINT 135 Series Operation Manual page 95

Actions for Media-Specific Registration
Step Action
3 Repeat the steps 1 and 2 with the next
registration sheets.
4 The media registration is completed when
the control panel displays the message
[Remove the registration sheet from the
glass plate.]
Touch [Next].
5 The control panel displays the message
[Do you want to print the verification
chart?]. When you touch [Yes], the verifi-
cation chart is printed.
The automatic media registration is com-
pleted.
6
If the adjustment was successful, this icon
appears behind the media registered in
the media catalog in the Settings Editor.
7 When the following conditions apply, you
must enter the actual sheet size via the
manual media registration for this media.
• The media registration is not optimal
• The sheet is larger than 420 mm (16.5")
8 Only if the media registration is not opti-
mal, continue with the next option.
94 Chapter 5 - Media Handling
and
in X direction (feed direction) and larg-
er than 297 mm (11.7") in Z direction
(perpendicular to the feed direction).
Remark
NOTE
The media specific registration
adjustment overwrites any au-
tomatic or manual media specif-
ic registration performed previ-
ously.
Registration Values on page
See
If you do not enter the actual sheet size,
you will see a large deviation in front-to-
back side registration.
Print the verification chart to verify if the
media registration is optimal now.
98.
Canon varioPRINT 135 Series