Canon varioPRINT 135 Series Operation Manual page 107

Values for the Media Registration
If the media registration is not optimal, change the value or use another setting depending on
how the registration looks.
Values for the Media Registration
Settings front side
[Trapezoid ({0})]
Settings back side
[Trapezoid ({0})]
Ranges
Setting
[Trapezoid ({0})]
Diamond Shape Image
When to do
The diamond shape is perpendicular to the feed direction. You can measure the diamond shape
via the diagonal of the image.
106 Chapter 5 - Media Handling
What to enter
The image is adjusted in mm (inches).
Measured difference > 0:
• At the bottom of the sheet, the length of the
image in the feed direction decreases.
• The distance between the circles at the bot-
tom of the verification chart decreases.
Measured difference < 0:
• At the top of the sheet, the length of the im-
age in the feed direction decreases.
• The distance between the circles at the top
of the verification chart decreases.
What to enter
The image is adjusted in mm (inches).
Measured difference > 0:
• At the bottom of the sheet, the length of the
image in the feed direction decreases.
• The distance between the dots at the bottom
of the verification chart decreases.
Measured difference < 0:
• At the top of the sheet, the length of the im-
age in the feed direction decreases.
• The distance between the dots at the top of
the verification chart decreases.
Range (mm)
-2.5 to +2.5
Range (inches)
-0.098 to +0.098
Canon varioPRINT 135 Series