Canon varioPRINT 135 Series Operation Manual page 181

Introduction to Automated Workflows
Attribute
[Header up/down]
[Offset stacking]
[Value for N sets]
[Punches]
[Folding]
[Fold to]
[Trim]
[Trim / target width]
[Trim / target height]
[Contrast]
[Brightness adjustment]
[Resolution]
[Halftoning]
[Fattening]
[Minimum line width]
[Enhanced color rendering] You can indicate whether the [Enhanced color rendering] must be
[Job destination]
[DocBox name]
[Printing workflow]
[PDL type]
[Separator sheets]
[Account ID]
[Cost center]
[Custom]
180 Chapter 6 - Carry Out Print Jobs
Description
You can indicate whether the header of the sheets must be [Head-
er-up] or [Header-down].
You can indicate whether the prints must be delivered to the out-
put location with or without a small shift.
You can indicate the number of sets that will be shifted together.
You can indicate how many punch holes are required.
You can indicate the required folding method.
You can indicate the size in which the media must be folded.
You can indicate how the media must be trimmed.
You can indicate the width that must be trimmed.
You can indicate the height that must be trimmed.
You can indicate the contrast of the print.
You can indicate whether the print must be darker or lighter.
You can indicate whether the job must be printed on [1200 x 1200
dpi] or [600 x 2400 dpi].
You can indicate whether the job must be printed [Line 200 LPI],
[Dot 200 LPI] or [Dot 125 LPI].
You can indicate whether [Fattening] must be on or off.
You can indicate whether the minimum line width must be main-
tained, or thinner lines can be printed.
on or off.
You can indicate the list to which the job must be sent. For the var-
ioPRINT 135 Series, you can select [Waiting jobs], [Scheduled
jobs] or [DocBox jobs] (optional).
You can indicate the name of the DocBox to which the jobs must
be sent.
You can indicate the type of workflow for the jobs. You can select
[Receive, then print while RIP is in progress] or [Streaming].
You can indicate whether PostScript®, PCL, PDF or XPS must be
used as page description language.
[A separator sheet is an empty sheet that is inserted before a set.
If 'As in job' is selected, the addition of a separator sheet to the job
is as defined in the job. If the job does not specify separator sheet,
no separator sheet is added to the job.]
You can indicate the number of the customer that will be used for
accounting purposes.
You can indicate [Cost center can be a maximum of 40 characters
long.]
[Custom can be a maximum of 255 characters long.]
Canon varioPRINT 135 Series