Table of Contents
Advertisement
3
5
6
4
31
2
4
1
M 0:00.00
1
M 0:00.00
USING THE TAPE COUN TER
The cou nter di gits show the actual tape position
relative to the point on the tape where the counter
was reset.
To Index Scenes on a Tape
Press the COUNTER M EMORY button to display the
counter in the viewfinder.
Rewind the tape to the beginning and then press
the COUNTER R ESET button to set the counter to
zero. You will see "0:00.00" in the viewfi nder.
As you play back or record a tape, write down the
counter digits at the beginn ings of particular scenes
so that you can find them q u ickly later.
To Return to One Specific Point
< < During Playback>>
1
Press the COUNTER RESET button to set the
counter to zero at the point you want to return to
later.
2
Press the STOP button (on the top of the cam
corder) when playback has finished.
3
Press the COUNTER MEMORY button. The "M"
indicator wi ll appear i n the viewfinder.
4
Press the � R EW or the FF
tape wi l l rewind or fast forward until the counter
reaches zero, then stop.
To Return to One Specific Point
< < During Recording>>
1
Press the COUNTER RESET button, to set the
counter to zero at the point you want to return
to. To reset the counter, press the RESET
button lightly and release it i
2
When you have fini shed recording, press the
REC START/STOP button to stop recording.
3
Turn the POWER switch to VCR.
4
Press the COUNTER M EMORY button . The "M"
indi cator wi ll appear in the viewfinder.
5
Press the � R EW button. The tape will rewind
until the counter reaches zero, then stop.
6
Press the PLAY button to view the scene.
mmD
• The counter reading is not precise; the point on the tape
that you want to return to may be a few seconds away
from the counter reading you wrote down, or from the
counter zero point.
• The counter does not change when u n recorded sections
of tape are played back.
(ffi
button. The
m.
m
ediately.
Advertisement
Table of Contents
