Table of Contents
Advertisement
TV set
If your TV's antenna input is connected to a VCR
Disconnect the cable between the
converter between them as shown below.
All-channel antenna
Coaxial
OR
cable
F-type
connec1or
antenna
feeder
RF
converter
300 - ohml
75-ohm
adaptor
VHF
connec1ing cable
TV
VCR,
and
and insert the
CONNECTI ON TO A TV WITH
OUT AU DI ONI DE O JACKS
Use the supplied RF converter and VHF connecting
cable.
1
Disconnect your antenna feed from the TV.
• If the antenna feed is flat ribbon cable, con
nect it to the 300-ohm/75-ohm ad aptor, then
plug the adaptor to the RF converter 's IN
FROM ANT terminal.
• If the antenna feed is a coaxial cable with an
F-type connector, plug it directly into the RF
converter's I N FROM ANT socket.
2
Plug the VHF connecting cable into the
OUT TO TV socket on the RF converter and the
75-ohm coaxial antenna socket on the TV.
3
Plug the RF converter cable into the AUDIO,
VIDEO, and RF DC-OUT jacks on the camcorder.
AN
Set the
4
Set the channel select switch to channel 3 or
channel 4 (whichever channel is not used in
your area). If both are used, select the least
watched.
5
Set the TV tuner to the same channel.
6
RF
Turn the camcorder's POWER switch to VCR.
7
Load a video cassette (cassette window facing
outward ), and then press the PLAY button.
• Use only the supplied RF converter with the
camcorder.
• The RF converter is a sealed unit. Do not attempt
to open or modify it. Do not damage, drop or sub
ject the unit to vi bration.
• Unplug the RF converter during lightning storms.
• If your VHF antenna cable is a 300-ohm flat ribbon
feeder, screw the two lugs to the adaptor as
shown below.
• To resume normal TV operation, turn the POWER
switch to OFF on the camcorder, or unplug the RF
converter cable from the camcorder.
• The playback sound is monaural.
IN/OUT select switch to OUT.
a +ntenna
VHF
·
.
.
28
Advertisement
Table of Contents
