Canon imageFORMULA CR-25 Startup Startup Manual page 54

Check reader
Hide thumbs Also See for imageFORMULA CR-25 Startup:
Table of Contents

Advertisement

3
Dampen a cloth with water, wring the cloth out thoroughly, and then wipe the
dirt off of the rollers while rotating them.
There are 18 rollers located in the positions illustrated below. (Rollers m and
n comprise two rollers each, an upper roller and a lower roller.)
Note
• Move roller e in the direction of the arrow to rotate rollers b, d, e,
k, and p.
When cleaning rollers b, d, e, k, and p, wipe them while rotating
roller e.
• Use a cotton swab to wipe the dirt off of the rollers that are difficult to
reach, such as rollers a, b, j, n, o, and p.
• Do not force the rollers if they will not turn. In this case, wipe dirt only
off of the exposed area.
Regular Maintenance
49

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imageformula cr-55 check transport startup0435b008Cr-55M11061M11056Imageformula cr-55 ... Show all

Table of Contents