Canon imageFORMULA CR-25 Startup Startup Manual page 45

2
Pull out the document feed tray.
3
Load two documents with their edges flush against the mark.
4
Adjust the position of the eject stopper. (If necessary, see the illustration in
step 4 on p. 38.)
5
Click [Scan Page] from the [File] menu and confirm that only one sheet is fed.
Note
If the sheets do not feed properly (they double-feed or no sheets are fed), see
"Calibrating Paper Thickness," on page 42 to adjust for paper thickness.
40
Using the Scanner
Document Load
Mark