Canon imageFORMULA CR-25 Startup Startup Manual page 49

6
Adjust the gap between the feeding roller and the separation roller to optimum
width.
1. While one sheet remains in place between the rollers, continuously attempt
to slide the second sheet (in front of the remaining sheet) to the right, back
through the roller gap.
2. Slowly turn the paper thickness adjustment dial clockwise (right) just until
the second sheet stops feeding into the gap.
IMPORTANT
Turning the adjustment dial clockwise too much may damage the rollers.
7
Remove the sheets from the paper path and close the maintenance cover.
8
Confirm that the document feeds properly.
See "Confirming Proper Document Feeding," on page 39.
If additional assistance is required, contact your local authorized Canon
dealer, service representative, or the *Canon Service Support Center.
* : For US customers only.
9
Place a marking label on the unit pointing to the adjustment dial as illustrated
below. This will serve as a reference point for future adjustments if required.
Marking labels
for thickness adjustment dial
44
Using the Scanner
Second sheet does not feed
into the gap.