Adjusting The Print Position - Canon imageFORMULA CR-25 Startup Startup Manual

Adjusting the Print Position

Before using the imprinter, adjust the print position.
1
Open the imprinter cover.
2
While squeezing in both sides of the print position adjustment lever, move the
print cartridge carriage up or down to adjust the print position.
Note
You can adjust the print position by moving the print cartridge carriage up
or down, so that the distance between the document bottom edge and the
center of text is one of three levels: either 1.8" (43.5 mm), 1.9" (47 mm), or
2.0" (50.5 mm). (All values are approximate.)
3
Gently close the imprinter cover.
Print Position Adjustment Lever
Carriage
1.7" (43.5 mm) 1.9" (47 mm)
from document from document
bottom edge
bottom edge
Using the Scanner
2.0" (50.5 mm)
from document
bottom edge
45