Print Characters - Hitachi IJ RX2-SD160 Instruction Manual

4.9 Print characters

Model type
RX2-B
RX2-S 240 char. × 1 line
*) RX2-S OP : Up to 5 lines
OP : Up to 1,000 characters
● There are no limits on the number of digits which can be input at one print item.
4.9.1 Print fixed characters
(1) Function
● Inputs the characters to be printed.
● The kinds of characters which can be input are defined for each character size. Moreover, there is an
appropriate inter-character space depending on the kind of character. (See "4.7.4 Set dot matrix,
inter-character space, and other parameters".)
● There is an "Insert" mode and an "Overwrite" mode when inputting.
● "Duplicate" by selecting the start and end of the character string and "Paste" at an arbitrary position are
possible.
● The characters which can be set as dedicated characters are shown below.
For dedicated characters, single words are handled collectively at input and deletion.
● Inputting an Arabic character will move the cursor to the left.
● Use the Insert mode to input Arabic characters.
Lines and Message length (Characters)
1 line
60 char. × 1 line 30 char. × 2 lines
120 char. × 2 lines
Ex. Dedicated character (Simple Chinese)
2 lines 3 lines
20 char. × 3 lines
80 char. × 3 lines
●Print characters 4-32