Hitachi IJ RX2-SD160 Instruction Manual page 188

(4) Data copy operation from other models
●Data created on KX, PX, PB, PXR, RX, PH or PH(op:10.4 type LCD) can be copied to RX2.
Following operations 1 through 3 must be conducted prior to using other models' data on RX to store the
backup data of other models in the USB memory via a PC.
Note "PHC" shown below stands for Color LCD of PH(op:10.4 type LCD).
1. Create a "RXDAT" folder if it does not already exist in USB memory.
2. Create a new folder with the name of the printer's model name (KX, PX, PB, PXR,
PH or PHC) under the "RXDAT" folder created in 1. above.
3.
PXR
PHC
7-32 ●Backing up data to USB memory
KX Create a new folder and change its name to [8-digits serial number] under
"KX" folder created in 2. above.
Create a "IJPDATA" folder under the folder saved as the [8-digits serial
number] and copy every backup data file to "IJP DATA" folder.
USB memory
PB Copy the backup serial number folder which is created on PB and rename
it as [8-digits number] under the "PB" folder created in 2.
USB memory
PX, Copy the backup serial number folder which is created on PX or PXR
under the "PX" or "PXR" folder created in 2.
USB memory
PH, Copy the backup serial number folder which is created on PH or PHC
under the "PH" or "PHC" folder created in 2.
USB memory
Prior operation
RXDAT
KX
00000000
IJPDATA
RXDAT
PB
00000001
RXDAT
PX
00000002
PXR
00000003
RXDAT
PH
00000004
PHC
00000005