Press the Start switch. (Press for about 2 seconds.)
3
(Depending on the model, there may not be a Start switch. When the main power switch of 2 is
pressed, the following "Print description" screen appears.)
In the case of turning on the power again, ensure that status indicator lamp is off when Start switch is
pressed.
The "Print description" screen shown below appears.
If the "Select login user" screen opened, see "3.1.4 Specifying the user".
Print description
Message name[ ]
−
Ink operating time 100(hours)
Cumulative op. time 100(hours)
Print count 1000(prints)
Ink pressure 0.000(MPa;standard value:0.250)
Change
Select
message
message
●Confirm the print description, count value, and calendar character contents.
[Stop ]
Current user ID : user2
Overwrite
Adjust print
Operation
message
parameters
management
2015.07.07 12:45
Com=0
M
Startup
Manual
+
Inter-
laced
Print count
reset
Menu
●Start operation 3-2