1. The "nozzle rubber seal" prevents drying of the orifice plate and dust from sticking to the
plate. When the IJ printer will not be used for several days over a holiday, etc., we
recommend that the "nozzle rubber seal" be installed between the orifice plate and charge
electrode at shutdown.
Nozzle rubber seal
Usage precautions
1
Store the "nozzle rubber seal" in a plastic bag, etc., to protect it from dirt and dust.
Always install the "nozzle rubber seal" after cleaning it with makeup.
2
When installing the "nozzle rubber seal", be careful not to deform the charge
3
electrode.
Handling the nozzle rubber seal
Orifice plate
Charge electrode
●Shut down operation 3-16