Ink ejection using the Manual Control Menu
Use this procedure when you want to eject ink from the nozzle for a purpose other than printing.
(Use only during maintenance. To print, use the Startup
Press the Manual
Press Ready .
● Operation can be aborted by pressing the Cancel at the "Manual Control Menu" and "Ink Jet
Startup Confirmation message".
● If the print head cover installed, the printer will not enter the Ready state even if this operation is
performed. (Enters the Standby state)
3-9 ●Start operation
. The Manual Control menu appears. Press the Eject ink → Ready .
M
Manual
Com=0
Press Eject ink .
=====
Ejects ink while apply-
ing no deflection volt-
Eject ink
age.
=====
The ink jet will be turned ON.
Solution To turn the ink jet ON, press <Ready>.
Ready
)
Startup
Press Manual .
2015.07.07 12:45
M
Startup
Manual
Manual Control Menu
Ink Jet Startup Confirmation
=====
Cancel
=====
Cancel