Table of Contents
Advertisement
1.1 Please follow the below basic safety principles
(1) Have only sophisticated or experienced personal perform the machine operation or
maintenance.
(2) Please read and understand the operation manual thoroughly before operation.
(3) Please place the manual close to the machine for easy access.
(4) Please have only authorized person keep the keys to the machine.
(5) All operation and maintenance personnel need to know the location of the emergency
switch, its function and operation.
1.2 Precautions for the transportation and installation
(1) Please make sure that the floor is solid enough to support the machine.
(2) Only one person is allowed to lift and move the machine for safety reason.
(3) When lifting and moving, Nobody is allowed to be under or near the machine.
(4) Please wear protective helmet when moving, installing or clearing the machine.
(5) All levers, which tighten, need to be tightened.
(6) If the moving object weighs over 25kgs, Please use only proper movement equipment for it.
(7) Please make sure that the slings are strong enough to lift the machine or the subjects.
(8) Please power off before movement and installation. If necessary to power on, please let other
persons know the location of the emergent stop.
(9) Please put on leather gloves or similar protective equipments when moving, installing or
clearing the machine.
1.3 Precautions for operation
(1) Please don't remove any protection guard or any safety installation.
(2) Please don't remove or alter any location of the limit switches, restraint blocks or
interlocking mechanisms.
(3) Don't touch any switch with wet hand.
(4) Please don't put any part of your body on the moving parts of the machine or near to
them.
(5) The operation person have better no long hair, if it is impossible, please have it coiled in
a topknot and wear a safety helmet.
(6) Please wear no hand ring, watch, pearls or loose clothes. Operation should wear a safety
clothes.
(7) Please wear no slippery shoes while operating.
(8) Wearing gloves is needed when loading and unloading material.
(9) Only one person is allowed to operate the machine.
(10) While operation, Debris may fly off. So please wear a protective mask to prevent from
being injured.
(11) Please power off after work.
(12) Please wear a gauze mask if you are working, using cutting fluids.
(13) Please don't use the machine in a explosive environment.
(14) A risk of being squeezed is composed when the gearbox and the arm are descending or
the spindle is descending to the worktable. (The arm screw moves at a low speed of
0.8m/min.)
(15) Operator should stand in front of the machine. That's the operation position.
(16) Please clean with a vacuum sucker.
CHAPTR 1
Safety Guidelines
1-1
Advertisement
Table of Contents
