Transportation; The Diagram Of The Machine Weight And Its Gravity Center; The Movement Of The Machine - Sharp RD-1230 Operation Manual

4.2 Transportation

4.2.1 The diagram of the machine weight and its gravity center

The weight differ due to the different models. Their data is as blow:
MODEL
Total Weight
Required Forklift
Note:
Please make sure that the forklift tonnage is suitable for the machine.
The above arrow pointed place is the machine's gravity center. It is about 200 mm far from
the Column, measured from the middle of the wooden crate.

4.2.2 The movement of the machine.

There are using forklift to move the machine.
The following is the procedure, precaution and illustration for moving the machine with
forklift.
TPR-1230
2300 kgw
2.5 tons
a. Have a suitable forklift move to the wooden crate.
b. As diagram shown, insert two forks into the underneath of the
wooden crate.
c. Adjust the distance from the forks to the gravity center till L1
is equal to L2. (L1 & L2=450mm)
d. Have forks fully inserted into the underneath of the wooden
crate.
e. Have the machine fastened to the forks and forklift, using
metal chain or wire.
Precaution：
a. Forks must be fully inserted.
b. L1 must be equal to L2 so that the machine can be in balance.
TPR-1230H TPR-1600H
2300kgw
2.5 tons
4-2
TPR-2000H
5100kgw 6600kgw
5 tons 7 tons