Table of Contents
Advertisement
The relevant names
No
Name
1 Top Cover
2 Column
3 Transmission ball
screw.
4 Arm
5 Rotating lever
6 Work table
7 Base
8 Spindle Motor
9 Three steps feeding
rate selection ring
10 Two steps feeding
rate selection ring
11 Dual Speed
changing lever
12 Triple speed
changing lever
13 High-low speed
changing lever
14 Auto feeding lever
15 Manual feeding
wheel
16 Hand wheel
17 Spindle
18 Cutting fluid
adjustment switch
19 Feeding Lever
20 Bit releasing lever
21 Main Scale
22 Cutting fluid pump It is designed to extract out the fluid from the container.
23 Column clamping
devise
24 Oil Pressure pump
motor
25 Metal cover
26 Gearbox clamping
devise
27 Counter weight
28 Guide lever
29 Electricity box
：
It is located on the top of the Column, inside which Elevating Motor and Reducing
Speed Motor are installed.
It is designed to support the Gearbox and Arms. It connects with the Base.
It is designed to transmit the rotation of the Elevating Motor to the Arm so that it
can move up and down.
It is to support the Gearbox. It connects with the Column.
It is designed to move the Arm. It is easy and safe to use.
It shortens the distance between the work piece and drilling bit. The T-shaped
surface facilitates the clamping and positioning of the work piece.
It serves as a foundation, the gravity center of the machine. It contains cutting fluids
inside. It can support the work piece. Its T-shaped surface facilitates the clamping
and positioning of the work piece.
It is the source of the driving for the Spindle.
It is designed to select the feeding rate. Used together with the two steps feeding rate
selection lever, it provides 6 options for the feeding rate.
It is designed to select the feeding rate. Used together with the three steps feeding
rate selection lever, it provides 6 options for the feeding rate.
It is designed to switch the spindle rotation speed. Used together with the three steps
feeding rate selection lever, it provides 6 options for the feeding rate.
It is designed to switch the spindle rotation speed. Used together with the two steps
feeding rate selection lever, it provides 6 options for the feeding rate.
It is designed to switch the spindle rotation speed. Used together with the two and
three steps feeding rate selection lever, it provides 12 options for the feeding rate.
It is used simultaneously with the feeding lever to enable the auto mechanism.
It indicates the scale of the manual feeding. It rotates simultaneously with the auto
feeding devices.
It is designed to move the Gearbox. It can move right- or leftward.
It is the place where the drilling bit, tapper and drill clamp head are installed to.
While at drilling, cutting fluid might be used. The switch is used to control the
passage volume.
It is to control on and off of the auto feeding mechanism.
When releasing the drilling bit, a releasing pin is used. This Bit releasing lever works
the same as the releasing pin.
It indicates how deep the drilling has reached.
It is the dynamic source of the oil pressure pump.
There are the ball screw and oil pressure pump inside. It is designed to protect the
operation and staffs' safety.
It is designed to fasten the gearbox. It is used simultaneously with the ball screw.
After feeding finished, the Spindle will return to the original point due to the counter
weight.
It is designed to guide the gearbox movement and clamp it.
Most of the control elements for the radial drill are put in this box.
Description
5-4
Advertisement
Table of Contents
