Adjusting The Eq - Yamaha 01V Owner's Manual

Adjusting the EQ

EQ can be adjusted using the SELECTED CHANNEL controls, the quickest method, or
the EQ pages in conjunction with the cursor buttons, [–/DEC] and [+/INC] buttons,
and PARAMETER wheel.
For Input Channels 1–16
1. Use [SEL] buttons 1 through 16 to select channels.
2. Use the [HIGH], [HI-MID], [LO-MID], and [LOW] buttons to select EQ
bands, and the F and G controls to adjust the frequency and gain, respec-
tively.
If the EQ AUTO SCREEN option is turned on in the preferences ("Setting 01V Prefer-
ences" on page 203), the EQ page shown below appears, and the Home fader mode is
selected. This page can also be located using the [EQ/ATT] button.
The EQ can also be adjusted on this page by using the cursor buttons to select param-
eters and the PARAMETER wheel or [–1/DEC] and [+1/INC] buttons to set them.
For Input Channels 17–24
1. Press the [OPTION I/O] button.
2. Use [SEL] buttons 17 through 24 to select channels.
3. Use the [HIGH] and [LOW] buttons to select EQ bands, and the F and G
controls to adjust the frequency and gain, respectively.
If the EQ AUTO SCREEN option is turned on in the preferences ("Setting 01V Prefer-
ences" on page 203), the OPTION page shown below appears. This page can also be
located using the [OPTION I/O] button.
For quick EQ'ing select
a channel and use the
EQ controls.

Adjusting the EQ

EQ HIGH
PAN
HI-MID
F
LO-MID
G
LOW
SELECTED CHANNEL
01V—Owner's Manual
63