Yamaha 01V Owner's Manual page 166

156
Chapter 12—Effects
DIST->DELAY
Distortion and delay effects in series.
Parameter
DST TYPE
DRIVE
MASTER
TONE
N.GATE
DLY BAL
DELAY
DLY NOTE
FB.GAIN
HI.RATIO
FREQ.
MOD
NOTE
DEPTH
TEMPO
1.
2.
3. For more information about the DELAY, NOTE, and TEMPO parameters, see "Setting
MULTI FILTER
Three-band parallel filter (24 dB/octave)
Parameter
TYPE 1
TYPE 2
TYPE 3
FREQ. 1
FREQ. 2
FREQ. 3
LEVEL 1
LEVEL 2
LEVEL 3
RESO. 1
RESO. 2
RESO. 3
01V—Owner's Manual
Range
DST1, DST2, OVD1,
OVD2, CRUNCH
0–100
0–100
–10 to +10
0–20
0–100%
0.0–2725.0 ms
*1
–99 to +99%
0.1–1.0
0.05–40.00 Hz
*2
0–100%
*3
25–300 bps
on the tempo setting)
Delay, Freq, Note & Tempo Parameters" on page 137.
Range
HPF, LPF, BPF
HPF, LPF, BPF
HPF, LPF, BPF
28 Hz–16.0 kHz
28 Hz–16.0 kHz
28 Hz–16.0 kHz
0–100
0–100
0–100
0–20
0–20
0–20
Description
Distortion type (DST = distortion, OVD = overdrive)
Distortion drive
Master volume
Tone control
Noise reduction
Distortion and delay balance (0% = distortion, 100%
= delayed distortion)
Delay time
Used in conjunction with TEMPO to determine DELAY
Feedback gain (plus values for normal-phase
feedback, minus values for reverse-phase feedback)
High-frequency feedback ratio
Modulation speed
Used in conjunction with TEMPO to determine FREQ.
Modulation depth
Used in conjunction with NOTE parameters to
determine DELAY and FREQ.
Description
Filter 1 type: low pass, high pass, band pass
Filter 2 type: low pass, high pass, band pass
Filter 3 type: low pass, high pass, band pass
Filter 1 frequency
Filter 2 frequency
Filter 3 frequency
Filter 1 level
Filter 2 level
Filter 3 level
Filter 1 resonance
Filter 2 resonance
Filter 3 resonance
(Maximum value depends