Mono Delay - Yamaha 01V Owner's Manual

GATE REVERB, REVERSE GATE
Early reflections with gate, and early reflections with reverse gate.
Parameter Range
TYPE Type-A, Type-B
ROOMSIZE 0.1–20.0
LIVENESS 0–10
INI.DLY 0.0–500.0 ms
DIFF. 0–10
DENSITY 0–100%
HI.RATIO 0.1–1.0
ER NUM. 1–19
FB GAIN –99 to +99%
HPF Thru, 21 Hz–8.0 kHz
LPF 50 Hz–16.0 kHz, Thru Low-pass filter cutoff frequency

MONO DELAY

Basic repeat delay.
Parameter Range
DELAY 0.0–2730.0 ms
*1
NOTE
FB.GAIN –99 to +99%
HI.RATIO 0.1–1.0
HPF Thru, 21 Hz–8.0 kHz
LPF 50 Hz–16.0 kHz, Thru
*2
25–300 bps
TEMPO
1.
on the tempo setting)
2. For more information about the DELAY, NOTE, and TEMPO parameters, see "Setting
Delay, Freq, Note & Tempo Parameters" on page 137.
Effects Parameters
Description
Type of early reflection simulation
Reflection spacing
Early reflections decay characteristics (0 = dead, 10 =
live)
Initial delay before reverb begins
Reverb diffusion (left–right reverb spread)
Reverb density
High-frequency feedback ratio
Number of early reflections
Feedback gain
High-pass filter cutoff frequency
Description
Delay time
Used in conjunction with TEMPO to determine DELAY
Feedback gain (plus values for normal-phase
feedback, minus values for reverse-phase feedback)
High-frequency feedback ratio
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Used in conjunction with NOTE to determine DELAY
139
(Maximum value depends
01V—Owner's Manual