Docking Station Assembly; Separating The Top And Bottom Housings - GE Dash D 0 0005 G Series Service Manual

Docking Station Assembly

Separating the Top and Bottom Housings

short screws
long screws
5-4
Field Replaceable Units: Docking Station Assembly
015A
016A
017A
Dash Port Docking Station
2000966-037
1. Remove the six screws from the bottom housing.
2. Hold onto both housings and turn the unit over.
3. Slide and hold the security lever in the far right
position while separating the top and bottom
housings.
4. Continue to hold onto the security lever and
gently let it slide back into its resting position.
5. Remove the locking lever spring and pin.
Revision B