Docking Station Power-Up Tests - GE Dash D 0 0005 G Series Service Manual

Verify the AC power and Communication Links

Docking Station Power-up Tests

3-18
Maintenance: Checkout Procedures
1. Slide the security lever to the far left position.
2. Complete the "Docking Station Power-up Tests"
Test" starting on page 3-18.
1. Verify that a monitor is connected to the docking station.
2. Verify the docking station's security lever is in the far left position.
3. Remove the batteries from the monitor and unplug the docking
station from AC power to turn the monitor off.
4. Restore the batteries to the monitor and plug the docking station into
AC power to turn the monitor on.
5. Verify all the monitor's front panel indicators illuminate on power
up.
6. Verify the AC indicator on the monitor stays illuminated.
127(
If the AC LED stays on, but the screen is blank, the monitor is
likely in "standby mode" (battery charging). Press the Power
button to turn on the monitor.
Dash Port Docking Station
2000966-037
009A
and the "Network
Revision B