Switch Setting Of Intelligent Function Module - Mitsubishi Electric MELSEC Q Series User Manual

4.4

Switch Setting of Intelligent Function Module

The switch setting of the intelligent function module is performed in "I/O assignment settings" of GX Developer.
(1) Setting Item
Set the intelligent function module switches in 16-bit data.
When the switches are not set, Switch 1 is set to "0" (default), and data link is performed among stations within
the range of the number of connectable stations.
module switch
Switch 1
Switch 2
Switch 3
Switch 4
Switch 5
Do not set Switch 2 through Switch 5. Doing so may result in malfunction.
Downloaded from ManualsNet.com
Intelligent
function
Last station number
setting
search engine
CHAPTER 4 PROCEDURE BEFORE OPERATION
Setting item
Set the last station number among stations that perform data link.
This setting disables data link with unconnected stations, reducing link refresh
time. ( Page 38, Section 3.5)
When a station number exceeding the number of connectable stations
( Page 35, Section 3.4 (2)) is set, the setting is ignored.
<Setting range>
1 to 64
When 0 or more than 64 is set, data link is performed among stations within the
number of connectable stations.
No setting (blank)
No setting (blank)
No setting (blank)
No setting (blank)
1
4
47