Mitsubishi Electric MELSEC Q Series User Manual page 23

(3) Installation conditions of a dedicated power supply and a power supply
adapter
The installation conditions of the power supplies depend on the connected devices and wiring length.
For the conditions, refer to the user's manual for the dedicated power supply or the power supply adapter.
Always connect a dedicated power supply or a power supply adapter to the trunk line. (Connection to branch lines is not
allowed.)
(4) Preventing incorrect input/output from remote I/O modules
To prevent incorrect input/output from remote I/O modules, design a system with considering the following:
(a) At power-on and power-off
Turn on the power of remote I/O modules (dedicated power supply or power supply adapter), then start data
link.
Also, stop data link then turn off the power of remote I/O modules.
Downloaded from ManualsNet.com
Executed
Master module
(Data link status)
Stopped
ON
Remote I/O module
(Power status)
OFF
search engine
Data link start
CHAPTER 2 SYSTEM CONFIGURATION
Data link stop
2
21