Mitsubishi Electric MELSEC Q Series User Manual page 19

1 GENERAL DESCRIPTION
1 - 4
Downloaded from ManualsNet.com
(7) Choice of fine temperature measurement units and various control
temperature ranges
The temperature measurement unit of each loop can be set to 1°C or 0.1°C in
Centigrade or to 1°F or 0.1°F in Fahrenheit, enabling you to choose appropriate
resolution for control. Also, the controllable temperature range can be selected
from 0.0 to 400.0°C (when K type thermocouple is used), 0.0 to 3000.0°C (when
R type thermocouple is used) and others, enabling you to make adequate setting
for the object to be controlled.
2
(8) E PROM for backing up set values
The set values in buffer memory can be stored into E2PROM for data backup.
Using the test function of GX Developer to write data directly to the buffer
memory, what is required in a sequence program is "LD
minimum.
(9) Detection of disconnection
The Q64TCTTBW and Q64TCRTBW can detect the disconnection of a heater.
(10) Easy settings with GX Configurator-TC
Sequence programs can be reduced since the GX Configurator-TC (sold
separately) allows the Q64TC settings on the screen.
Also, the GX Configurator-CT simplifies the confirmation of the module settings
and operation status.
search engine
MELSEC-Q
" + "OUT Yn1" at the
1 - 4