Mitsubishi Electric MELSEC Q Series User Manual page 116

5 UTILITY PACKAGE (GX Configurator-TC)
5 - 5
Downloaded from ManualsNet.com
(6) Number of parameters that can be set in GX Configurator-TC
When multiple intelligent function modules are mounted, the number of
parameter settings must not exceed the following limit.
When intelligent function modules are installed
Q00J/Q00/Q01CPU
Q02/Q02H/Q06H/Q12H/Q25HCPU
Q02PH/Q06PH/Q12PH/Q25PHCPU
Q12PRH/Q25PRHCPU
Q02UCPU
Q03UD/Q04UDH/Q06UDH/Q10UDH/
Q13UDH/Q20UDH/Q26UDH/Q03UDE/
Q04UDEH/Q06UDEH/Q10UDEH/
Q13UDEH/Q20UDEH/Q26UDEHCPU
Q50UDEH/Q100UDEHCPU
MELSECNET/H remote I/O station
For example, if multiple intelligent function modules are installed in the
MELSECNET/H remote I/O station, configure the settings in GX Configurator so
that the number of parameter settings for all the intelligent function modules does
not exceed the limit of the MELSECNET/H remote I/O station. Calculate the total
number of parameter settings separately for the initial setting and for the auto
refresh setting.
The number of parameters that can be set for one module in GX Configurator-TC
is as shown below.
Target module
Q64TCTT/Q64TCRT
Q64TCTTBW/Q64TCRTBW
Example) Counting the number of parameter settings in Auto refresh setting
search engine
to:
Initial setting
Initial setting
21 (Fixed)
21 (Fixed)
The number of settings in this one line is counted
as one setting.
The number of settings is not counted by columns.
Add up all the setting items in this setting screen,
then add them to the total for the other intelligent
function modules to get a grand total.
MELSEC-Q
Maximum number of parameter settings
Auto refresh setting
512 256
512 256
512 256
512 256
2048 1024
4096 2048
Reserved Reserved
512 256
Auto refresh setting
61 (Max.)
73 (Max.)
5 - 5