NEC SL2100 Hardware Manual page 16

ISSUE 4.0
The Ringer Equivalence Number (REN) for this terminal equipment is 0.3. The REN assigned to each
terminal equipment provides an indication of the maximum number of terminals allowed to be
connected to a telephone interface. The termination on an interface may consist of any combination of
devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the
devices does not exceed five.
Avis:
L'indice d'équivalence de la sonnerie (IES) du présent matériel est de 0.3. L'IES assigné à chaque
dispositif terminal indique le nombre maximal de terminaux qui peuvent être raccordés à une interface
téléphonique. La terminaison d'une interface peut consister en une combinaison quelconque de
dispositifs, à la seule condition que la somme d'indices d'équivalence de la sonnerie de tous les
dispositifs n'excède pas 5.
ISED Registration Number: IC: 140L-SL2100
Ringer Equivalence Number (REN): 0.3
BATTERY DISPOSAL
The SL2100 system includes the batteries listed below. When disposing of these batteries, Chassis,
and/or Unit, you must comply with applicable federal and state regulations regarding proper disposal
procedures.
Unit Name
IP7[ ]-CPU-C1
External Battery
(IP4WW-Battery Box)
DTZ-8R-1 Cordless Handset
ML440 Wireless Handset
The SL2100 IP7[ ]-CPU-C1 provides Real-Time Clock backup for approximately three years. The
Lithium battery should be replaced every two years.
IMPORTANT SAFEGUARDS FOR BATTERY DISPOSAL
DO NOT PLACE USED BATTERIES IN YOUR REGULAR WASTE! THE PRODUCT YOU
PURCHASED CONTAINS LITHIUM, SEALED LEAD BATTERIES. LITHIUM, SEALED LEAD
BATTERIES MUST BE COLLECTED, RECYCLED, OR DISPOSED OF IN AN ENVIRONMENTALLY
SOUND MANNER.
The incineration, landfilling or mixing of sealed lead batteries with the municipal solid waste stream is
PROHIBITED BY LAW in most areas. Contact your local solid waste management officials for other
information regarding the environmentally sound collection, recycling, and disposal of the battery.
Sealed lead batteries must be returned to a federal or state approved sealed lead battery recycler.
This may be where the batteries were originally sold or a local seller of automotive batteries. Contact
your local waste management officials for other information regarding the environmentally sound
collection, recycling and disposal of the battery contained in this product.
The packaging for the SL2100 system contains the following labels regarding proper disposal.
Regulatory
Type of Battery
Lithium
Sealed Lead
Ni-MH
Lithium-ion
Quantity
1
2 per IP4WW-Battery Box
1
1
SL2100
Note
14