NEC SL2100 Hardware Manual page 108

ISSUE 4.0
3. Remove the switch-hook from the unit. Turn the tab toward the top. Then slide the hook-switch
into position. Refer to
Install two screws into a wall. The screw heads must be remained about 3 mm (0.12").
4.
83.5 mm
(3.287")
5. Mount the telephone on the wall.
Wall-mounting
holes
Figure 2-98 Mounting the IP Multiline Telephone
• REMOVE A TRANSPARENT PROTECTION SHEET from the telephone,
when installing the telephone.
INSTALLING THE MULTILINE TELEPHONES AND OPTIONAL TERMINALS
Figure 2-88 Hook-Switch
Hook-switch hanger
Figure 2-96 Hook-Switch Hanger
Figure 2-97 Wall-Mount Screw Guide
Hanger.
Hook-switch hanger
3 - 4 mm 1 - 3 mm
(0.12" - 0.16") (0.04" - 0.12")
7 - 9.5 mm
(0.28" - 0.37")
Minimum 10 mm (0.39")
SL2100
Wall side
106