NEC SL2100 Hardware Manual page 137

ISSUE 4.0
1. Insert two mounting screws as shown below. Allow about 3/16 of an inch between the wall and
screw heads for mounting the telephone.
Figure 2-134 Inserting Screws for Wall Mounting
2. Plug the AC adapter in the charging unit. Wrap the AC adapter cord around the strain relief.
Figure 2-135 Wrapping the AC Adapter Cord Around the Strain Relief
3. Place the charging unit on the posts of the wall screws and push down until it is firmly seated.
Figure 2-136 Placing the Charging Unit on the Wall
4. Plug the AC adapter into a standard 120 Vac wall outlet. Refer to
Charging Unit on the
INSTALLING WIRELESS DECT TELEPHONES
Wall.
Figure 2-136 Placing the
SL2100
135