Table of Contents
Advertisement
Product Overview
Figure 16
1. Throttle control
2. Choke lever
3. Fuel cap
4. Drive-control lever
5. Engine on/off switch
6. Hand grip
7. Recoil handle
8. Oil-fill cap
Controls
Engine On/Off Switch
Use the engine On/Off switch to shut the engine off.
Ensure that the switch is in the O
starting the engine.
9. Removable side shield
10. Tines
11. Adjustable cable
12. Pulley box
13. Wheel
14. Drag stake
15. Handlebar-adjustment
knob
position before
N
Throttle Control
The throttle controls the engine speed, and it has a
continuous-variable setting.
Operate the machine using full throttle for best
performance.
Choke Lever
Move the choke lever on the engine to the C
position when initially starting a cold engine, then
move it into the R
Drive-Control Lever
Squeeze the drive-control lever to the hand grip to
engage the tines. Release it to disengage the tines.
Specifications
Specifications and design are subject to change
without notice.
Height
Length
Width
Weight
Tilling width
Tilling depth
g358001
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
11
position once started.
UN
95 cm (37.3 inches)
127 cm (50.0 inches)
61 cm (24.0 inches)
35.4 kg (78 lb)
28, 41, or 53 cm (11, 16, or 21
inches)
28 cm (11 inches)
HOKE
Advertisement
Table of Contents
