Better Image Quality
The CCD sensor and the color night view mode provides better image quality and low light performance.
- The CCD sensor gives you clear image.
- You can monitor live video (Motion JPEG) that refreshes its image 30
frames per second.
- Color night view mode allows you to monitor the camera in low
illuminance.
Remote Pan/Tilt/Zoom/Focus
The following features allow you to operate Network Camera from web browser on your PC. High speed
Pan/Tilt operation can move the lens horizontally from -175° to +175° and vertically from -120° to 0° in
mounting on the table and from 0° to +90° in mounting on the ceiling. This movable lens allows you to
view a wide range of perspective from a distant place. Network Camera has a 42x magnifying capacity:
a 21x optical zoom and a 2x digital zoom. Automatic and Manual Focusing features provide you with
detailed and distinct images. Additionally, the following control features are available to easily and
quickly monitor the camera.
Click to Center ......... When you click a certain point on the camera image, the point is centered on the
image.
Preset Position ......... You can register 8 preset positions. When you click each button, the image
switches to its position.
Output Control ......... You can control the external devices (Open or Short to GND) (E.g., turning the light
on or ringing a buzzer).
Video Output
Network Camera has an analog composite output terminal. You can view images from Network Camera
on TV and record them on videotapes.
SD Memory Card *4 Recording
The camera has an SD memory card slot. You can record camera images to the SD memory card. If you
enable alarm buffer/transfer, you can record the image at the timing of signal detection of door sensor
or light. About 58,000 images (320 x 240 resolution and standard quality) can be recorded to 1 GB SD
memory card. If you enable 1-minute interval timer buffer/transfer, you can record the images for about
41 days.
Enhanced Multi-Camera Page
Multi-Camera page displays up to 4 cameras while supporting each audio 2-way communication. The
previous model displays only 4 cameras, but this camera can switch 3 sets of 4 cameras. Additionally,
the camera can displays maximum 12 cameras on a page in a static image.
Supporting Viewnetcam.com service
12