Table of Contents
Advertisement
6.3 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
/
/
burns from residual heat.
The indicators show the level of the
residual heat for the cooking zones you
are currently using. The indicators may
also come on for the neighbouring
cooking zones even if you are not using
them.
The induction cooking zones produce
the heat necessary for the cooking
process directly in the bottom of the
cookware. The glass ceramic is heated by
the heat of the cookware.
6.4 The heat setting
Turn the knob for the heating functions
to select a heating function. To
deactivate it turn the knob to the off
position
.
6.5 Automatic Switch Off
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after
you activate the hob,
• you spill something or put something
on the control panel for more than 10
seconds (a pan, a cloth, etc.). An
acoustic signal sounds and the hob
deactivates. Remove the object or
clean the control panel.
• the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking
zone cool down before you use the
hob again.
• you use incorrect cookware. The
symbol
comes on and the cooking
zone deactivates automatically after 2
minutes.
• you do not deactivate a cooking zone
or change the heat setting. After
some time
comes on and the hob
deactivates.
The relation between the heat setting
and the time after which the hob
deactivates:
There is a risk of
Heat setting
, 1 - 2
3 - 4
5
6 - 9
6.6 Using the cooking zones
Put the cookware on the cross / square
which is on the surface that you cook.
Cover the cross / square fully. Induction
cooking zones adapt to the dimension of
the bottom of the cookware
automatically. You can cook with the
large cookware on two cooking zones at
the same time.
6.7 Automatic Heat Up
If you activate this function you can get a
necessary heat setting faster. The
function sets the highest heat setting for
some time and then decreases to the
correct heat setting.
To activate the function a
cooking zone must be cold.
To activate the function for a cooking
zone: turn the knob for a cooking zone
to the A position.
display. Immediately set the correct heat
setting.
To deactivate the function: turn the
knob to the off position.
6.8 PowerBoost
This function makes more power
available to the induction cooking zones.
The function can be activated for the
induction cooking zone only for a limited
period of time. After this time the
induction cooking zone automatically
sets back to the highest heat setting.
To activate the function for a cooking
zone: touch
.
To deactivate the function: change the
heat setting.
ENGLISH
13
The hob deacti-
vates after
6 hours
5 hours
4 hours
1.5 hour
shows on the
comes on.
Advertisement
Table of Contents
