Lenovo ThinkSystem SR550 Maintenance Manual page 86

Figure 53. 3.5-inch drive filler removal
2. Touch the static-protective package that contains the new drive to any unpainted surface on the outside
of the server. Then, take the new drive out of the package and place it on a static-protective surface.
To install a hot-swap drive, complete the following steps:
Watch the procedure
A video of this procedure is available at
C9jFjZnXQ6AmTXaIdX6_HJ
Figure 54. 2.5-inch hot-swap drive installation
ThinkSystem SR550 Maintenance Manual
78
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.