Install A Pcie Adapter - Lenovo ThinkSystem SR550 Maintenance Manual

Figure 89. Removing the PCIe adapter from the system board
Step 1. Pivot the PCIe adapter retention latch to the open position.
Step 2. Grasp the PCIe adapter by its edges and carefully pull it out of the PCIe slot.
Note: The PCIe adapter might fit tightly into the PCIe slot. If necessary, alternatively move each
side of the PCIe adapter a small and equal amount until it is removed from the slot.
If you are instructed to return the old PCIe adapter, follow all packaging instructions and use any packaging
materials that are provided.

Install a PCIe adapter

Use this information to install a PCIe adapter on the system board or the riser assembly.
This topic contains the following information:
• "Install a PCIe adapter on the system board" on page 114
• "Install a PCIe adapter on the riser assembly" on page 115
Notes:
• Your server supports the PCIe slot 5 when two processors are installed.
• PCIe slot 6 does not support PCIe adapters with external mini-SAS HD connectors.
• Only use PCIe adapters provided by Lenovo. Lenovo makes no warranty regarding non-Lenovo products
or services. For a list of supported PCIe adapters, see:
index.shtml .
• When installing Ethernet adapters with RJ-45 connectors, observe the following installation sequence:
https://static.lenovo.com/us/en/serverproven/
.
Chapter 3 Hardware replacement procedures
113