Air Baffle Replacement - Lenovo ThinkSystem SR550 Maintenance Manual

Figure 30. Top cover installation
Note: Before you slide the cover forward, ensure that the tabs on the front, rear, and side of the cover
engage the chassis correctly. If all the tabs do not engage the chassis correctly, it will be difficult to remove
the cover later.
Step 1. Ensure that the cover latch is in the open position. Lower the top cover onto the chassis until both
sides of the top cover engage the guides on both sides of the chassis.
Step 2. Pivot the cover latch and slide the top cover to the front of the chassis at the same time until the top
cover snaps into position. Ensure that the cover latch is completely closed.
Step 3. Use a screwdriver to turn the top cover lock to the locked position.
Complete the parts replacement. See "Complete the parts replacement" on page 164.

Air baffle replacement

Use this information to remove and install the air baffle.
S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
S017
.
Chapter 3 Hardware replacement procedures
59