Figure 86. Riser 2 assembly installation
Note: Properly route the cables.
Complete the parts replacement. See "Complete the parts replacement" on page 164.
PCIe adapter replacement
Use this information to remove and install a PCIe adapter.
The PCIe adapter can be an Ethernet adapter, a host bus adapter, a PCIe RAID adapter, or any other
supported PCIe adapters.
Remove a PCIe adapter
Use this information to remove a PCIe adapter.
This topic contains the following information:
• "Remove a PCIe adapter from the riser assembly" on page 110
• "Remove a PCIe adapter from the system board" on page 112
Remove a PCIe adapter from the riser assembly
Use this information to remove a PCIe adapter from the riser assembly.
ThinkSystem SR550 Maintenance Manual
110