Table of Contents
Advertisement
Figure 15
1. Left shelf
11.
Align the right shelf with the right end of the rear
shelf and the edge of the deck
Figure
16). Using the left shelf as a template,
locate, mark, and drill three 9/32 inch diameter
holes in the deck.
Figure 16
1. Right shelf
12.
Secure the right shelf to the deck with 1 bolt
(1/4-20 x 1 inch), 2 bolts (1/4-20 x 3/4 inch), and
3 locknuts. Position the bolt heads to the inside
of the deck.
Mounting the New Deflector
Stop
Parts needed for this procedure:
g012543
Procedure
1.
(Figure 12
and
1. New deflector stop
2. Mark and drill holes
g012544
2.
3.
9
7
1
Deflector stop
2
Capscrew, 1/4 x 3/4 inch
2
Locknut, 1/4 inch
Using the new deflector stop as a template, set
it on the original flat deflector stop
Ensure that the new deflector stop is flush at
the bottom, contacting the side of the deck, and
parallel with the outside edge of the deflector
support.
Figure 17
Locate, mark and drill two 9/32 inch diameter
holes through the old deflector support.
Mount the new deflector support to the old
deflector stop with 2 bolts (1/4-20 x 3/4 inch) and
locknuts (1/4-20 inch), as shown in
(Figure
17).
g012545
3. Bolts and locknuts
Figure
17.
Advertisement
Table of Contents
