Download
Share
Print this page
Toro 30124 Operator's Manual
  1. Manuals
  2. Brands
  3. Toro Manuals
  4. Lawn Mower Accessories
  5. 30124
  6. Operator's manual
Toro 30124 Operator's Manual

Toro 30124 Operator's Manual

32” bagger for proline mid–size mowers
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
FORM NO. 3319–597 Rev A
32" BAGGER
for
Proline Mid–Size Mowers
Model No. 30124
Operator's Manual
IMPORTANT: Read this manual carefully. It contains information about your
safety and the safety of others. Also become familiar with the controls and
their proper use before you operate the product.

Advertisement

loading

Related Manuals for Toro 30124

Summary of Contents for Toro 30124

  • Page 1 FORM NO. 3319–597 Rev A 32” BAGGER Proline Mid–Size Mowers Model No. 30124 Operator’s Manual IMPORTANT: Read this manual carefully. It contains information about your safety and the safety of others. Also become familiar with the controls and their proper use before you operate the product.
  • Page 2 “Note” emphasizes general information worthy of special attention. The left and right side of the machine is determined by sitting on the seat in the normal operator’s position. The TORO Company All Rights Reserved Printed in USA...

  • Page 3: Installation

    Installation Loose Parts DESCRIPTION QTY. Exhaust Elbow Install on muffler Clamp Bagger support Frame tube Bolt 1/2–13 x 1-1/4” (32 mm) Install bagger frame to traction unit Bolt 3/8–16 x 1-1/4” (32 mm) Washer 5/16” (8 mm) Chute Install chute and grass bag Grass Bag...
  • Page 4 Installation Install Exhaust Elbow Install Bagger Frame Remove bolt and locknut securing top of R.H. IMPORTANT: To protect bag from engine bracket support and R.H. idler bracket to rear exhaust, all mowers with mufflers mounted frame (Fig. 1). on right side of engine must have exhaust elbow installed.
  • Page 5 Installation Loosely secure front of bagger support to Reverse previously removed bolt and place traction unit frame with (2) 1/2 - 13 x 1-1/4” through from behind rear frame. Secure idler (32 mm) flange head bolts (supplied in loose bracket, spacer, spring, wheel guard, bagger parts bag) and (2) 1/2-13 flange nuts previously support and washer (from bagger loose parts) removed (Fig.
  • Page 6 Installation Install Chute and Grass Bag Place open end of bag over chute flange. Draw up on string and secure with clip (Fig. 7). Slide chute assembly under deflector and into locking position with mating part of hinge lock. Insert locking pin (Fig. 5). Support bracket on chute assembly Note: must hook behind pivot post on deck.

  • Page 7: Operation

    Operation Operating and Bagging Tips Remember that the mower is wider with the To Avoid Personal Injury: bagger installed. By turning too sharply in Become familiar with all operating and confined places you may damage the bagger. safety instructions in the operator’s manual Do not trim with the right side of the mower for your mower before using this because you could damage the bagger.

  • Page 8: Maintenance

    Maintenance Inspecting the Bagger Caring for the Grass Bag Inspect the bagger after the first ten hours of Do not wash the grass bag. operation and monthly thereafter. To prevent rapid deterioration of bag material, store the bag so it drys completely after each use. POTENTIAL HAZARD The grass bag material may tear, wear, and POTENTIAL HAZARD...